The room that carries the day
Kitchen Renovations in Toronto & the GTA
A kitchen renovation redesigns your kitchen's layout, cabinetry, countertops, and finishes to better suit how you cook and gather, whether that means a full reconfiguration or an updated refresh. We complete kitchen renovations for homeowners in Markham, Toronto, Richmond Hill, Vaughan, Newmarket, and Aurora. Call (647) 278-2494 for a free consultation.
One team for design, permits and construction

Who it is for
The right brief, before the first drawing.
This service fits homeowners with a kitchen that feels cramped, outdated, or poorly laid out for how they actually cook and entertain. It also suits those looking to open the kitchen to adjoining living space or update finishes throughout.
How the work proceeds
How a Toronto kitchen renovation runs, step by step
Consultation & measure
We visit your kitchen to discuss goals, layout ideas, and take measurements.
Design & selections
We finalize the layout, cabinetry, countertops, and finishes with you.
Permits (if required)
We arrange any permits needed for plumbing, electrical, or structural changes.
Demolition & construction
Our trades remove the existing kitchen and build out the new design.
Final install & walkthrough
We install final fixtures and finishes and review the completed kitchen with you.
Timeline
What affects a kitchen renovation timeline in Toronto
Kitchen renovations typically take six to fourteen weeks from demolition to completion, depending on the extent of layout changes and whether plumbing or electrical work is involved. Cabinetry and countertop lead times, your selection decisions, and any permit requirements can add to the overall schedule.
What affects cost
What drives kitchen renovation cost
- Layout and structural changes
- Cabinetry style and materials
- Countertop material selection
- Plumbing and electrical relocation
- Appliance and fixture choices
We do not publish package prices. A free consultation is the right place to talk through scope before anyone suggests a number.
Do I need a permit to renovate a kitchen in Toronto?
Not always. In Toronto, installing cabinetry and millwork or repairing plumbing fixtures doesn't need a building permit. Moving walls, changing the layout, or installing or modifying plumbing or heating systems generally does. Zoning still applies even when no permit is needed, so confirm the details for your home with Toronto Building.
How long will we be without a kitchen?
It depends on whether you refresh the kitchen or change its layout. New cabinets and counters take less time than a layout change that moves plumbing, electrical or walls and may need a permit. Cabinetry and countertop lead times also drive the schedule. We give a project-specific schedule after the consultation.
Can you change our kitchen layout?
Yes. A kitchen renovation can range from replacing cabinetry and countertops to reworking the entire layout, including plumbing and electrical changes. Moving walls or plumbing usually brings a permit into the picture, so we plan the layout, the drawings and any approvals together before demolition starts.
A kitchen packs plumbing, gas, electrical, ventilation, structure and expensive millwork into one room. The result is only as good as the order those things are decided and installed in. This section explains what a kitchen renovation involves behind the cabinets and where codes and permits fit.
Refresh or reconfigure
Two kinds of kitchen renovation look similar on a mood board and behave very differently on site.
- A refresh keeps the layout. Cabinetry, counters, backsplash, flooring and fixtures change, and the services stay where they are. This is mostly a procurement and installation exercise.
- A reconfiguration moves the sink, range, walls or openings. That brings plumbing, venting, gas, electrical and sometimes structure into the plan, and it brings permits and inspections.
Many projects sit between the two, such as moving a sink two feet or opening a wall to the dining room. Because the line is not obvious, we settle it during the measure and design stage, before cabinetry is ordered.
Permits and codes that touch a kitchen
Toronto states that installing cabinetry and millwork, and repairing or replacing plumbing fixtures, does not need a building permit. It also lists as permit-required work: adding or removing walls, creating or enlarging openings, installing or modifying heating and plumbing systems, and installing a fireplace or chimney. Zoning applies in both cases.
Specific code points show up in most kitchens:
- Structural change. Removing a wall can be a structural alteration. An engineer determines whether the wall carries load and designs the beam and posts that replace it.
- Ventilation. The Ontario Building Code (O. Reg. 163/24, Section 9.32) does not allow a range hood to serve as the home's principal ventilation fan. Kitchens normally need supplemental exhaust capacity of at least 50 L/s. The ducting route, makeup air and the type of range all affect hood selection.
- Gas. Moving or adding a gas line is work for a TSSA-certified gas technician; homeowners are not exempt. A change in load or pressure may need an application to Enbridge.
- Electrical. Kitchen circuits, receptacles and protection devices follow the Ontario Electrical Safety Code. A licensed electrical contractor files the notification of work with the Electrical Safety Authority. Homeowners can do their own electrical work but must file the notification themselves.
- Plumbing. Relocated drains and vents are plumbing modifications. In Toronto this needs a permit, and the work is inspected before it is covered.
What happens behind the cabinets
A kitchen is won or lost before the first cabinet is installed. These are the points that usually decide how well the finished room works.
- Layout against code and clearances: appliance swings, work aisles, outlet spacing and the path of the exhaust duct are resolved on drawings, not on site.
- Services at rough-in: water, drain, gas, electrical, exhaust and any lighting are roughed in against the final cabinet layout. Moving them afterwards means cutting into finished walls and floors.
- Subfloor and structure: old floors are checked and levelled where needed, because heavy cabinetry and stone counters need a flat, stiff base.
- Insulation and air sealing on exterior walls, which is easiest when walls are open.
- Lighting plan: ceiling, under-cabinet and accent lighting wired at rough-in.
How a kitchen project runs
- Measure and brief We measure the room, review existing services and agree how the kitchen is used day to day.
- Layout and selections The layout, cabinetry, counters, appliances, plumbing fixtures and lighting are decided together so each one fits the others.
- Drawings and permits Where walls, plumbing or other regulated work is involved, drawings and the permit application are prepared before demolition.
- Ordering Cabinetry, counters and appliances are ordered once the layout is final, because they are the longest lead items.
- Demolition and rough-in The old kitchen comes out and plumbing, gas, electrical and exhaust are installed or adjusted. Required inspections happen before anything is covered.
- Close-up and cabinetry Insulation, drywall, flooring and cabinetry follow, with wall finishes timed so that cabinetry and trim are not damaged.
- Countertops and finishes Countertops are templated after cabinets are installed so that the measurements match the final installation. Backsplash, fixtures and appliances follow.
- Final inspection and walkthrough Final inspections close the permit, then we walk the finished kitchen with you.
What shapes the schedule
Beyond the general range quoted earlier on this page, these are the factors that move a kitchen schedule:
- Cabinet and counter lead times. Custom or imported products can take longer than the construction itself.
- Counter templating. Counters can only be measured after cabinets are in, which is a built-in pause in the sequence.
- Permits and inspections, when plumbing, gas, structure or openings change.
- Appliance specification. Cut-outs and utility connections are set by the appliance you choose, so changing it late creates rework.
- Temporary arrangements. Planning a temporary cooking and dishwashing setup lets the family live through the project more easily.
What drives cost, without a number
These factors move the cost of a kitchen more than any other:
- Layout change and how much plumbing, gas, electrical and structure it touches.
- The cabinetry system: stock, semi-custom or fully custom, and the hardware.
- Countertop material and fabrication complexity.
- Appliance package and the services each appliance needs.
- Ventilation, which can involve a long duct run or makeup air.
- Lighting, flooring and finishing level.
A free consultation is where we talk through the scope so that the conversation about cost starts from drawings rather than guesses.
More questions, answered
More questions, answered
Do I need a permit to replace kitchen cabinets?
No. In Toronto, installing cabinetry and millwork does not need a building permit. Moving walls, plumbing or heating generally does, and zoning applies either way.
Can I keep my gas range if I move it?
Gas piping work is done by a TSSA-certified technician. Moving the range usually means moving the gas outlet, so that needs to be planned and done by that technician before cabinets are set.
Does a range hood have to vent outside?
Cooking exhaust is best ducted to the exterior rather than recirculated, which is a design decision we raise early because the duct route affects cabinets and structure. The Building Code also limits the use of a range hood as the home's principal ventilation fan, so the hood is considered separately from whole-home ventilation.
Do I need an engineer to remove a wall?
Whenever the wall could carry load or the opening affects the floor or roof above. An engineer designs the beam and posts, and the permit drawings reflect it.
Can we stay in the house?
Yes in most cases. A temporary kitchen elsewhere in the house is the usual approach. Water and power interruptions are planned in advance and kept short.
Who orders the cabinets and counters?
We coordinate cabinetry, counters and appliance ordering as part of the project so that dimensions, delivery and installation line up with the schedule.
Sources
Regulatory details checked against the sources below in October 2026. Municipal rules change; we confirm current requirements for your address during your consultation.
Planning a kitchen renovation? Talk to us about scope.
Questions about this service
Quick answers.
Who does kitchen renovations in Toronto, Markham and Richmond Hill?
Kings Valley Homes completes kitchen renovations for homeowners in Toronto, Markham, Richmond Hill, Vaughan, Newmarket and Aurora, including layout, cabinetry, counters, permits and construction by one team. Call (647) 278-2494 for a free consultation.
Can you change our kitchen layout?
Yes, we can reconfigure your kitchen layout, including moving plumbing, electrical, and even walls where structurally feasible. Layout changes generally add time and complexity compared to a like-for-like refresh, so we walk through the trade-offs with you during design so you can decide what fits your goals.
Do you supply cabinetry and countertops?
We coordinate cabinetry and countertop selection and installation as part of the renovation, working with suppliers to match your style and budget. You are welcome to bring your own preferences or ideas, and we will help translate them into materials and finishes that work within your kitchen's layout.
How long will we be without a kitchen?
Most kitchen renovations leave the space unusable for six to ten weeks, depending on the scope of demolition and construction involved. We can discuss temporary cooking arrangements during your consultation, and we sequence work to restore basic functionality, such as water access, as early as reasonably possible.
Which areas do you renovate kitchens in?
We renovate kitchens for homeowners throughout Markham, Toronto, Richmond Hill, Vaughan, Newmarket, and Aurora. Whatever your kitchen's current layout or condition, our team can meet with you to discuss options and outline a renovation plan suited to your space and household.
Related services
- Bathroom renovation — bathroom layouts, fixtures, tile and installation.
- Home renovation — whole-home renovations in Toronto and the GTA.
- Smart home automation — smart home automation and heated surfaces.
Book a free consultation
Free consultation
Book your free kitchen consultation
Call (647) 278-2494 or email info@kingsvalleyhomes.ca. Tell us the municipality, the property, and what you want the home to do next.
