Fitted to the house, not added later

Custom Closets and Millwork in Toronto & the GTA

Custom closets and millwork turn unused or awkward space into storage, built-ins and finished interiors that match the rest of the house. That can mean a walk-in or reach-in closet, a wardrobe, a media wall or bookshelf, a mudroom or home office, or trim and paneling such as wainscoting, casings and stair details. We design, build and install this work in-house. It can be a standalone project, or planned with your kitchen, bathroom, renovation or custom home. We work with homeowners in Markham, Toronto, Richmond Hill, Vaughan, Newmarket, and Aurora. Call (647) 278-2494 for a free consultation.

One team for design, permits and construction

Custom walk-in closet with oak cabinetry, LED-lit open shelving and an arched doorway, Toronto

Who it is for

Measure first, then the box and the trim.

This service fits homeowners who want storage, built-ins or trim designed for their rooms, whether that is a single standalone closet, a mudroom, a paneled wall, or a millwork package as part of a renovation or a new house. It also suits a kitchen or bathroom project that should continue the same cabinetry language into the rooms around it.

How the work proceeds

How custom closets and millwork in Toronto run, step by step

01

Consultation & measure

We visit the rooms, discuss how you use the space, and take detailed measurements.

02

Design & selections

We finalize layouts, materials, finishes, hardware and lighting with you.

03

Shop drawings & site prep

Detailed drawings are prepared, and any electrical, plumbing or permit work is planned before fabrication.

04

Fabrication & installation

We build the millwork in-house to the drawings and install it, scribed to the room.

05

Final adjustments & walkthrough

Hardware and finishes are completed, and we review the work with you.

Timeline

What affects a closets and millwork timeline in Toronto

There is no honest standard duration for custom closets and millwork, because a single reach-in and a house-wide trim package are different projects. Design and shop drawings, material lead times, whether the room is already finished, and any electrical or permit work all shape the schedule. We give a project-specific timeline after the measure.

What affects cost

What drives custom closet and millwork cost

  • Scope: a single closet versus built-ins or a multi-room millwork package
  • Materials and finishes
  • Hardware, lighting and interiors
  • Electrical, plumbing or wall changes
  • Matching existing cabinetry or trim

We do not publish package prices. A free consultation is the right place to talk through scope before anyone suggests a number.

Do I need a permit for custom closets or millwork in Toronto?

Not for the millwork itself. Toronto does not require a building permit to install cabinetry and millwork. Moving walls, creating or enlarging openings, or installing or modifying plumbing or heating generally does. New lighting and outlets are electrical work, filed with the Electrical Safety Authority. Zoning still applies, and we confirm the details for your address.

Sources: https://www.toronto.ca/services-payments/building-construction/building-permit/before-you-apply-for-a-building-permit/when-do-i-need-a-building-permit/ · https://esasafe.com/

Can closet lighting and power be added?

Yes. Lighting, switches and outlets in a closet or built-in are planned on the drawings and installed by a licensed electrical contractor, who files the notification of work with the Electrical Safety Authority. Doing this before the millwork goes in avoids cutting into finished boxes and walls.

Sources: https://esasafe.com/

Can closets and millwork be part of a renovation or a custom home?

Yes. We welcome standalone closet and millwork projects, and we also design, build and install this work in-house as part of a kitchen, bathroom, whole-home renovation or custom home, so finishes, lighting and rough-in line up. Planning it while walls are open is usually cleaner, and we will tell you which route fits your house after the measure.

Closets, built-ins and finish carpentry are used every day and are rarely specified early enough. The work is straightforward when the design, the services in the wall and the installation sequence are decided together. It is awkward when a closet is treated as an afterthought after the rooms are finished. This section explains what the work includes, which materials suit which uses, when a permit or electrical filing comes into play, and how the service fits a renovation or a custom home.

What this service covers

The work falls into three groups that often appear in the same project.

  • Custom closets and wardrobes: walk-in rooms, reach-in closets and fitted wardrobe cabinets, with hanging, shelves, drawers and lighting planned with the box.
  • Built-ins: media walls, bookshelves, window seats, mudroom lockers, and home office desks and storage, fitted to the room rather than placed in it.
  • Custom millwork and finish carpentry: wainscoting and wall paneling, coffered or tray ceiling details, crown and baseboard, door and window casings, and stair details.

Vanity cabinets and kitchen-adjacent pieces, such as a pantry, a tall cabinet or a run of millwork that meets a kitchen or bathroom, belong in the same conversation, because the finish, hardware and reveals should read as one interior.

We design, build and install this work in-house. Some projects are only a closet or a run of trim, which we welcome as a standalone job. Others are a millwork package for a whole-home renovation or a custom home. We settle the scope during the measure and design stage, before anything is built.

Walk-in closets, reach-in closets and wardrobes

The type of closet is a planning decision, not only a style decision. It depends on the room you have, how you dress, and whether walls, doors or lighting need to change.

  • A reach-in closet keeps the existing opening and is fitted with an interior: hanging, shelves, drawers or a combination. It is often the right answer when the room is already the right size and the work is about using the depth properly.
  • A walk-in closet is a small room. It needs a usable opening, a path you can stand in, and lighting that works when the doors are closed and the clothes are in place. If the walk-in is created by moving a wall or opening a new door, that is no longer only millwork.
  • A wardrobe is a fitted cabinet, used where there is no existing closet. It can sit in a bedroom, a hallway or a dressing area, and it has to be designed against the ceiling, the baseboard and any uneven floors.

Interiors are designed around what you actually hang, fold and store. Lighting, outlets and a hamper or laundry connection, if you want them, are decided on the drawings so they are not added after the boxes are built.

Built-ins throughout the house

Built-ins earn their place when they use a wall, a niche or a window that a free-standing piece would waste.

  • Media walls and fireplace surrounds, with space for screens, equipment and ventilation, and with cable and power routes planned before the wall is closed.
  • Bookshelves and display, including wall-to-wall or floor-to-ceiling runs, with uprights and shelves sized to the books or objects you actually have.
  • Window seats, which have to respect the window, any heat source under it, and the structure of the wall. Storage under the seat is common, and the seat height should be comfortable to sit on, not only look right on a drawing.
  • Mudroom lockers and entry storage: hooks, benches, cubbies and closed cabinets for coats, shoes and bags, designed for a wet Canadian entry rather than a showroom.
  • Home office built-ins: desks, filing, shelving and cable management, with outlets and data located for how the desk is used.

These pieces often share profiles, colours and hardware with nearby closets, kitchens or bathrooms, so they are specified as a set rather than as isolated furniture.

Custom millwork and finish carpentry

Finish carpentry is the layer that makes rooms feel complete: the lines around doors and windows, the meeting of wall and ceiling, and the details on stairs and walls. Custom millwork is how those lines are designed, rather than left to whatever stock profile is on the truck.

  • Wainscoting and wall paneling, from a simple dado height to full-height paneled walls, with layouts that land on openings, switches and corners rather than cutting through them.
  • Coffered or tray ceiling details. Decorative soffits and applied beams can be finish work. Changing the structure of a ceiling, or hiding new services in a bulkhead, needs to be coordinated with the rest of the project and may involve a permit.
  • Crown moulding, baseboard and casings, including taller or built-up profiles, and the returns, mitres and shadow lines that make them look intentional in older, out-of-square rooms.
  • Stair details such as applied wall paneling, newels, treads and nosings, or a change in the finish of an existing stair. Changing the geometry of a stair, or its guards and handrails, is construction work under the Building Code, not only decoration, and is planned accordingly.

In a house with existing trim, the first question is whether to match it, to simplify it, or to design a new language for the rooms in scope. That decision is easier before paint and flooring are finished.

Vanity and kitchen-adjacent cabinetry

Closets and built-ins often meet the kitchen or the bathroom, and the junction is where a project looks either considered or pieced together.

  • Kitchen-adjacent work can include a pantry, a tall cabinet, a bench or a millwork wall that continues the kitchen's lines into a hall, mudroom or dining room. If the kitchen is being renovated at the same time, these pieces should be designed with the kitchen layout, not after the cabinets are ordered.
  • Bathroom work can include a vanity, a linen tower or a medicine cabinet, and sometimes paneling. The vanity has to be planned with plumbing and, in a wet room, with the waterproofing and tile. Moving the sink or drain is a plumbing change, which is a different scope from replacing a cabinet in the same place, as explained on our bathroom renovation page.

We design these tie-ins so that door styles, colours, counters and hardware can be matched or deliberately contrasted, rather than leaving the difference to chance.

Materials and finishes

The right material depends on the use, the finish, and how much humidity or wear the piece will see. These are the substrates and finishes we discuss most often, with trade-offs rather than a single best choice.

  • MDF. A stable, uniform panel that takes paint and machined profiles well. It is a common choice for painted doors, panels and mouldings. It does not love prolonged moisture, and its edges and screw-holding are weaker than plywood, so it is used with that in mind.
  • Plywood. Stronger screw-holding and a better choice for many cabinet boxes, shelves and structural parts of a built-in. It can be painted, left as a veneer-grade face, or covered with a wood veneer. Construction-grade plywood and furniture-grade plywood are not the same product.
  • Wood veneer. A thin layer of real wood on a stable core, used when you want a stained or clear-finished grain without the movement of a wide solid panel. It is harder to repair than solid wood and cannot be sanded aggressively.
  • Solid wood. Appropriate for many trim profiles, some doors, and parts that may be stained and refinished later. Wide solid panels move with the seasons, so large doors and end panels are often veneered or engineered for stability.
  • Paint versus stain. Paint is more forgiving of the substrate and is the usual finish on MDF. A stained or clear finish shows the species and the grain, and it needs a stain-grade veneer or solid wood. Sheen, colour matching to existing cabinets, and whether the finish is applied before installation or on site, are decided before the pieces are built.

Hardware, lighting, mirrors and any stone or solid-surface tops are specified with the boxes so that clearances and edge details work.

Permits, electrical and related work

Toronto states that installing cabinetry and millwork does not need a building permit. Zoning still applies, and other municipalities publish their own lists, which we confirm for your address.

The line is not whether the work is "custom." It is whether the scope stays on the millwork, or whether it also changes the building.

  • Adding or removing walls, or creating or enlarging a door or window opening, generally needs a building permit. A new walk-in created by taking space from a neighbouring room can cross that line.
  • Electrical work, including new closet lighting, outlets, switches and in-wall wiring for a media unit or office, follows the Ontario Electrical Safety Code. A licensed electrical contractor files the notification of work with the Electrical Safety Authority.
  • Installing or modifying plumbing, for example moving a vanity sink or adding a laundry connection in a closet, generally needs a building permit in Toronto. Replacing a vanity or fixtures in the same place is treated differently.
  • Stair work that changes rise, run, width, guards or handrails is Building Code work, not only finish carpentry.

We identify these items at the measure, so any drawings, filings or inspections are in the plan before fabrication starts.

How a closets and millwork project runs

  1. Measure and brief We measure the rooms, check floors, walls, ceilings and existing trim, and talk through how the storage and the finished surfaces will be used.
  2. Design and selections Layouts, materials, finishes, hardware and lighting are decided together, including how the work meets any kitchen, bathroom or other millwork in the house.
  3. Shop drawings and related approvals Detailed drawings are prepared for fabrication. If walls, plumbing or electrical work is involved, that scope is planned and any permit or ESA filing is started before the site is opened up.
  4. Site preparation Blocking, electrical rough-in, plumbing changes and any wall or ceiling work are completed, and required inspections happen before surfaces are closed.
  5. Fabrication We build the pieces in-house to the approved drawings and the site measurements, including any scribe allowances for out-of-square rooms.
  6. Installation and finishing The millwork is set, scribed and fastened, hardware and lighting are fitted, and site-applied finishes are completed where they are part of the specification.
  7. Walkthrough We review the finished work with you and address adjustments.

How this work pairs with a renovation or a custom home

Millwork is easier, cleaner and usually more economical when it is planned with the rooms around it.

  • In a whole-home renovation, closets, built-ins and trim can be designed while walls are open, which is the right moment for blocking, outlets, lighting and any small layout change. Doing the same work after the house is painted means opening finished surfaces.
  • In a kitchen or bathroom project, pantry, vanity and adjacent millwork can share the same door style, colour and hardware, and can be ordered on a compatible schedule.
  • In a custom home, the millwork package belongs in the design stage, not after drywall. Lighting, power, data, ceiling details and stair finishes affect rough-in and should be on the drawings the house is built from.

We welcome standalone closet, built-in and trim projects in a finished house, not only work that is part of a renovation or a custom home. The measure has to be more careful, and the installation has to protect floors and paint, but the design, build and installation are still done in-house.

What shapes the schedule

We do not quote a standard duration, because a single reach-in and a house-wide millwork package are different projects. These are the factors that move the schedule:

  • The time it takes to settle layouts, samples and shop drawings.
  • Material and finish lead times, which can be longer for stain-grade veneers, specialty hardware and stone tops.
  • Whether the room is already finished or is part of a larger renovation, which changes when the millwork can be installed.
  • Electrical, plumbing or permit work, and the inspections that go with it.
  • Site-applied paint or clear finishes, which need dry time.
  • Access, and whether you are living in the house during installation.

A project-specific schedule is part of the conversation after the measure and the scope are clear.

What drives cost, without a number

We do not publish package prices. These factors do most of the work on cost:

  • The amount of millwork, and whether it is a single closet, a walk-in, a built-in wall or a trim package through several rooms.
  • Material and finish: paint-grade versus stain-grade, veneer versus solid, and any stone or specialty surfaces.
  • Interior fittings, hardware, lighting and glass.
  • How true the existing rooms are, and how much scribing or site fitting they need.
  • Electrical, plumbing or structural work tied to the design.
  • Matching existing cabinetry or trim, which can add design and finishing time.
  • Whether the work is standalone or sequenced with a renovation or a new house.

A free consultation is where we talk through the scope so that the conversation about cost starts from measurements and drawings rather than guesses.

More questions, answered

More questions, answered

Do I need a permit for custom closets or millwork?

In Toronto, installing cabinetry and millwork does not need a building permit. Moving walls, creating or enlarging openings, or modifying plumbing or heating generally does. Electrical work is filed with the Electrical Safety Authority. We confirm the rules for your address and scope at the start.

Can you add lighting and outlets in a closet or built-in?

Yes. New lighting and power are electrical work, done by a licensed electrical contractor and notified to the Electrical Safety Authority. The locations are planned on the drawings so that wiring is in place before the millwork is installed.

Do you only do this work as part of a larger renovation?

No. We welcome standalone closet, built-in and millwork projects, and we also include them in a renovation or a custom home. Planning them with a larger project is often cleaner, but it is not a requirement.

What is the difference between MDF, plywood and solid wood?

MDF is a stable, paint-friendly panel often used for painted doors and mouldings. Plywood is typically stronger for boxes and shelves. Solid wood is often used for trim and for stained work, but wide panels move with humidity, so large surfaces are frequently veneered. We recommend a combination based on the piece and the finish, not a single material for everything.

Can new millwork match our existing kitchen or bathroom cabinets?

Often, yes, closely enough to read as one interior, by matching door style, colour, hardware and reveals. An exact factory match is not always possible, especially with aged finishes, so we review samples in the room before fabrication.

Can we stay in the house while the work is done?

Usually, yes, for a closet or a limited millwork project. You will have reduced use of the rooms involved, and there will be some dust, noise and, if electrical or plumbing is included, short service interruptions, which we plan with you in advance.

Who designs and builds the millwork?

We do. We design, build and install closets and millwork in-house, so measurements, finishes and site conditions stay in one plan. The work can be a standalone project or part of a renovation or a custom home.

Sources

Regulatory details checked against the sources below in October 2026. Municipal rules change; we confirm current requirements for your address during your consultation.

Questions about this service

Quick answers.

Do you design and install custom closets?

Yes. We design, build and install walk-in and reach-in closets, wardrobes and closet interiors in-house, around how you actually store things. Lighting, hardware and finishes are decided with the layout, not added at the end.

Can this work be included in a renovation or a new home?

Yes. We welcome standalone closet and millwork projects. Custom closets, built-ins and finish carpentry can also be planned with a kitchen, bathroom, whole-home renovation or custom home so trim, cabinetry and storage read as one interior.

Do I need a permit for closets and trim?

In Toronto, installing cabinetry and millwork generally does not need a building permit. Changing walls or openings, or modifying plumbing or heating, generally does. Electrical work is notified to the Electrical Safety Authority. We confirm what your scope needs.

Which areas do you offer custom closets and millwork in?

We work with homeowners in Markham, Toronto, Richmond Hill, Vaughan, Newmarket, and Aurora. If you are unsure whether the work should be standalone or part of a larger project, a free consultation is the place to sort that out.

Book a free consultation

Free consultation

Book your free closets and millwork consultation

Call (647) 278-2494 or email info@kingsvalleyhomes.ca. Tell us the municipality, the rooms involved, and whether this is standalone work or part of a larger project.